Insulation Services
Blown-In Insulation in Brampton & the GTA
Overview
About Blown-In Insulation
Blown-in insulation is loose-fill material fed through a machine and a hose and spread across an open area such as an attic floor. It settles around joists, wiring and irregular framing that batts do not fit easily, which makes it a practical way to get continuous coverage in most residential attics.
KHG Insulation Services installs blown-in fiberglass and cellulose for new attic coverage and for upgrading existing insulation. For homeowners looking for blown-in insulation in Brampton or elsewhere in the GTA, the main questions are usually which material to use, how deep it should go and whether the current insulation can stay.
Depth is what determines performance. Loose-fill settles over time, so it is installed to a depth that accounts for settling. We set depth markers across the area so the installed level can be checked by the crew during the job and by you afterward.
Reference imageScope of Work
What the Service Involves
- Material selection
- We discuss fiberglass and cellulose and recommend one based on the space, the existing insulation and your preferences.
- Preparing the area
- Baffles are placed at the eaves, the hatch is dammed so material stays off the opening, and required clearances around fixtures are kept.
- Setting depth markers
- Rulers or markers are fixed to joists across the area. They show the target depth during installation and remain as a reference afterward.
- Blowing the material
- The machine stays outside or near the entry while the hose runs to the attic. Material is placed from the far edges back toward the access.
- Levelling and checking
- Low spots and areas behind framing are filled and the depth is checked against the markers before the hatch is closed.
Applications
Typical Project Applications
- Attic floors with no insulation
- Top-ups over existing batts or loose-fill
- Attics with irregular joists or obstructions
- Re-insulating after old material is removed
- Open floor areas above garages and additions
- Low-clearance attic spaces
Materials
Insulation Materials Used
Loose-fill fiberglass
Light, non-absorbent glass fibre that resists settling. Covers a given area with less weight on the ceiling.
Loose-fill cellulose
Recycled paper fibre treated for fire resistance. Heavier and more settled-in than fiberglass, and good at filling around obstructions.
Benefits
Why Blown-In Insulation Matters
Continuous coverage
Loose-fill fills around joists, wiring and blocking, leaving fewer gaps than cut pieces in a cluttered attic.
Works over existing insulation
Where the existing material is in good condition, blown-in can be added on top rather than removing everything.
Quick, tidy installation
Material moves through a hose, so there is limited traffic through the house and no bundles to carry into the attic.
Verifiable depth
Markers across the area show the installed depth, so the result can be checked rather than estimated.
What to Expect
From First Call to Installation
- 01
Send the basics
Call 289-889-2786 or use the quote form with the location, the area to be insulated and the type of access available.
- 02
Coverage and access review
We measure the area, check the existing insulation depth and condition, and confirm where the hose and machine can be set up.
- 03
Quote by area and depth
The quote is based on the area, the material and the target depth, plus any baffles or preparation the space needs.
- 04
Install, check and clean up
We blow the material to the marked depth, check coverage, clean the access path and walk you through the result.
FAQ
Blown-In Insulation Questions
Related Services
Often Combined With
Attic Insulation
Blown-in attic insulation and top-ups in fiberglass or cellulose, with baffles at the eaves and attention to air leakage at the ceiling.
Learn more
Air Sealing & Vapour Barriers
Air sealing and vapour barrier installation that controls air leakage and moisture movement through insulated walls and ceilings.
Learn more
Garage Insulation
Insulation for attached garage walls, garage ceilings, and the floors of rooms built over a garage.
Learn more
Request a Free Quote